Product Description
Superfish Pond Flow Eco Range - Multipurpose Pump
Pond Flow Eco energy saving multi purpose pond pump, suitable for use as a fountain, waterfall or filter pump. The Superfish Pond Flow Eco includes two different spray heads: a fountain nozzle and a mushroom nozzle which are easily adjustable in height.
Overload protection
The pump has a thermal overload safety device. In the event of any overheating of the motor, this device automatically switches off the pump. The cooling time is roughly 15 to 20 minutes, then the pump automatically comes on again. If the overload cutout is tripped, it is essential to identify and deal with the cause of the overheating.
Features
- Rubber feet suckers for stability
- Includes straining sponge filter
- Cable: 10m of outdoor cable (no plug fitted as this contravenes UK building regulations)
Model
|
Max Flow
|
Max Head
|
Power
|
Hose Outlet Direct from Pump
|
Hose Outlet
|
Dimensions (LxWxH)
|
600 | 600 lph | 1.2m | 8w | 20mm | 20mm |
12cm x 7cm x 7cm |
Top Tips:
Regularly cleaning your pump and the impeller (using limescale remover if you live in a hard water area) will prolong the life and efficiency of your pond pump.
Raising the pump off the bed of the pond will help reduce the amount of debris that comes into contact with the pump.
Never let the pump run out of water, it must be submersed at all times.
These pumps are designed to be run 24 hours a day and turned off for monthly maintenance only. Turning on and off more frequently then this will wear down the impeller more quickly, and the impeller is not covered under the warranty.
Please note the Max Head height of any pump is the absolute maximum this pump will push water too, but at this height you will get no flow, and should be used as a guide only. You will get a tiny trickle of water at just below the max head height and more and more flow rate as you bring the height of the hose down to pump level at which you will get the full flow rate of the pump advised on the chart.