Product Description
Seachem Reef Complete 100ml
Reef Complete® also includes magnesium and strontium in amounts proportionate to typical utilization ratios (100:5:0.1, Ca:Mg:Sr). This allows one to maintain these two important elements while maintaining calcium.
Reef Complete® is a blended product. It is not simply calcium chloride. Commercially available calcium chloride contains ammonia. Unlike other ionic calcium supplements, Reef Complete® is blended to a higher pH in order to force the ammonia to gas off into the atmosphere. In addition, Reef Complete® is more concentrated than any other liquid product on the market. Reef Complete® contains 160,000 ppm calcium. Our nearest competitor’s product is only 110,000 ppm calcium.
Directions:
Beginner:Use 1 capful (5 mL) per 80 L (20 US gallons) twice a week. Check calcium every 2 weeks and adjust amount or frequency accordingly. Advanced:
Check calcium level (use Reef Status™: Calcium to measure calcium), then follow addition regimen above until calcium is adjusted to 380–420 mg/L. Each 5 mL/80 L (20 US gallons) will raise calcium by about 10 mg/L. Quantity or frequency can be adjusted, but do not exceed 12.5 mL/80 L (20 US gallons) per day. Thereafter, use as required to maintain calcium. Expert:
After determining the calcium consumption rate, set up a continuous drip system. Use the following formula (or skip the math and use our Dosage Calculator) to determine how much to add to your top–off water: m=vc/160 (m=mL of product to add to top off water, v=volume of tank in liters, c=amount to raise calcium in mg/L). [For reference: 1 US gallon=3.8 L].
Notes:
If used with Reef Calcium™, it is not necessary to exceed 380 mg/L total calcium. Use Reef Status™: Calcium to measure calcium.
DO NOT OVERDOSE: Excess calcium may enhance the loss of carbonate alkalinity. Do not directly mix with any carbonate supplement. Best if calcium & carbonate additives are added on alternate days or at least 30 minutes apart.