Jebao TSP Sine Wave Technology Electronic Adjustable Pond and Waterfall Pumps 10000, 15000, 20000 and 30000 liters per hour
These pumps are suitable for both Submerged and Non-Submerged applications. It should be noted that if the pump is used in a non-submerged configuration then it must be set up in a technically competent fashion, ie, situated below the surface level of the pond with suitable pipe work and a continuous flow of water to the pump. Blockages or air locks can damage the motor by overheating and this will void the warranty.
Jebao TSP pond pumps are designed to pump water containing solid material to a watercourse, waterfalls, a pressurised or gravity filtration system, fountain displays, brooks, gargoyles, natural stone fountains, water circulations and aquarium return pumps. The motor has a durable ceramic shaft and vortex impeller blades and for problem free transport of dirt particles up to 8mm
Features:
• Sine Wave 2022 version controller technology provides super quiet operation
• High performance electronic pump with fully adjustable flow rate in stages from 30% to 100%
• Synchronous motor with a low wear ceramic shaft for long operational life
• Weatherproof energy saving controller with LCD screen
• Amphibious Pump suitable for external and internal operation
• If the impeller is blocked, the pump automatically switches to a "lock" position, ie the pump is at rest
• Energy efficient pump with innovative latest generation electronics
• Integral thermal resettable fuse automatically switches off the pump if it overheats to prevent motor damage
• For Submerged and Non Submerged applications
• New enclosed impeller design for quiet operation
• The outlet water direction can be rotated on the pump
• IC Electronic Detection - automatic power off protection upon no water
• These pumps are not supplied with a 13a UK Plug but a bare rubberised HO5RN-F cable to be hard wired into an external socket to comply with UK electrical regulations
• Controller to the pump cable is 10 metres, controller to the electrical supply cable is 1.5 metres
• Inlet cage or hose tail options are both supplied
• Motor protection if rotor is blocked
• Can be used in Marine and Freshwater applications
Dimensions: L x W x H & Weight, Electrical Consumption & Max Head Height:
TSP 10000 = 215mm x 105mm x 130mm. 1.8kgs. 85 Watts. 5.5 metres
TSP 15000 = 270mm x 110mm x 150mm. 2.1kgs. 130 Watts. 6.0 metres
TSP 20000 = 270mm x 120mm x 160mm. 2.8kgs. 200 Watts. 7.5 metres
TSP 30000 = 355mm x 130mm x 185mm. 4.6kgs. 385 Watts. 9.5 metres
All pumps are supplied with an inlet cage and also a pair of hose tails for hard plumbing of both the inlet and outlet if required. The 10000 pump is supplied with 4 sets of hose tails 20mm, 25mm, 32m & 38mm. The 15000, 20000 & 30000 pumps are supplied with a pair of stepped hose tails to cut down to take either 25mm, 32mm 40mm or 50mm pipework.
All pumps have a male thread on both the inlet and outlet, the 10000 pumps has 1 1/2" BSP threads and the 15000, 20000 & 30000 pumps have a 2" BSP thread