Product Description
Hidom Wave Maker
The Hidom WM wave maker range have a 360 degree rotation allowing you to adjust the direction of the water current, simulating the conditions of the ocean.
Wavemakers help eliminate "dead spots" in your aquarium. This is very important to corals, as the waste that they produce during respiration needs to be carried away from the tissue and to your filtration system. Lack of water circulation can cause the coral to suffocate, while uni-directional current can cause the coral to become irritated and, thus to close up. Wave makers help to eliminate these problems and enhance the health and growth of your tank inhabitants.
Features:
Supplied with a high-quality clip-action suction cup for easy attachment
Powerful Chuck
Easy to install & dismount
Spiral with gas to make waves, build a natural ecological environment
360 degree rotation to allow, full range of flow directions for the aquarium
Unique and novel design
Pump adapts to fresh and marine water
The pump cannot work outside water
Fitted with UK 3 pin plug
Specification
| Model | Power (watts) | Input (voltage) | Output (Lph) | Frequency (Hz) | Head Height Max (M) |
Dimensions (cm) WxLxH |
Cable Length (M) | Recommended Aquarium (L) |
| WM-1200 | 6 | AC220-240 | 2500 | 50/60 | 0.5 | 5.5x8.5x5 | 1.8 | 50-200 |
| WM-1600 | 12 | AC220-240 | 5000 | 50/60 | 0.5 | 9.5x9x5 | 1.8 | 150-500 |
| WM-1800 | 12 | AC220-240 | 3000 | 50/60 | 0.5 | 7x8x10 | 2 | 100-300 |
| WM-3600 | 24 | AC220-240 | 6000 | 50/60 | 0.5 | 7x13x10 | 2 | 300-600 |
